|T O P I C R E V I E W
||Posted - 12 Oct 2017 : 12:46:03
I am searching for a rear seat and all four side panels with arm rests, (doors and rears) in black for a 1971 fastback. Also, a good aluminium-faced centre console for manual gearbox. Anything available?
|7 L A T E S T R E P L I E S (Newest First)
||Posted - 15 Nov 2017 : 07:46:08
Thanks to Jason we now have a back seat! Still looking for the panels and centre console! Tim, I have sent you an email re your offer of panels.
||Posted - 11 Nov 2017 : 11:10:47
You should have an email from me, let me know if not.
||Posted - 14 Oct 2017 : 18:37:20
That's fantastic Jason, let me know when you get chance!
||Posted - 14 Oct 2017 : 03:53:17
I have a black rear seat that I have been saving for a project which will probably never happen so I will check to see if it is the style you are after. Won't be able to look for a couple of weeks but it's not going anywhere.
||Posted - 13 Oct 2017 : 18:29:37
I am after the heavier grain type used from 70ish until about 74. Back seat with the drop section in the middle of the backrest at the top, arm rests without the plastic-chrome strips. I have a decent pair of front seats ready to fit.
||Posted - 13 Oct 2017 : 12:37:02
Might be able to help with some of it. Got a set of black panels I bought on ebay a while ago along with the 70/71 type of arm rests. Got a back seat too but is in green. Would need to dig them out but it should all be there cos I ended up not needing them for the project car.
Building the 'Mark II' fastback Rapier ('Arrocuda').
||Posted - 13 Oct 2017 : 08:50:49
Tough call there AAA - welcome to the forum by the way. Are you bothered about which style?
Or post '71 rough-grain finish?
At least black is more likely to be around than trying to match one of the odd colours they did.
Can't help myself I'm afraid.